IOI Technology Corporation
Your I/O Solution Provider

U2-ATAPIS50 is a ATAPI to USB Bridge Board for converting standard ATAPI (fine-pitch 50-pin connector) slim ODD (Optical Disk Drive) into USB slim ODD. It’s fully compatible with all kinds of slim ODDs, like CD-ROM, DVD-ROM, CD-RW and DVD-RW drives.

• USB Interface:
  • USB bus transfer rate: high speed (480 Mbit) or full speed (12 Mbit)
  • USB 2.0 interface:  
    • USB B-type connector (U2-ATAPIS50-E, U2-ATAPIS50-ES)
    • Header 5-pin (U2-ATAPIS50-I, U2-ATAPIS50-IS)
  • USB Bus-powered or Self-powered mode operation:
    • USB bus-powered: (U2-ATAPIS50-E, U2-ATAPIS50-I)
    • USB self-powered: (U2-ATAPIS50-ES, U2-ATAPIS50-IS)
• IDE (ATA/ATAPI) Interface:
  • Fine-pitch 50-pin connector for slim CD/DVD drive.
• AT Attachment with Packet Interface Extension (ATA/ATAPI-7) Compliant:
  • ATA/ATAPI PIO mode data transfer.
  • ATA/ATAPI UDMA data transfer rates of 16.7, 25, 33, 44, 66, 100, 133, and 150 MB/s.
  • ATA/ATAPI PACKET Command feature set which supports INF-8090i packet commands.
  • Tagged command queuing (maximum 32 entries).
  • ATA/ATAPI-7 streaming feature set.
  • ATA/ATAPI-7 Force Unit Access commands.
  • ATA/ATAPI 48-bit Address feature set.
• Power Connector:
  • FDD (Floppy Disk Drive) like mini 4-pin power connector for U2-ATAPIS50-ES/U2-ATAPIS50-IS
• CD Audio connectors:
  • One 4-pin 2.54 pitch CD Audio connector.
  • One 4-pin 2.0 pitch CD Audio connector.

• Converting standard ATAPI (fine-pitch 50-pin connector) slim ODD (Optical Disk Drive) into USB slim ODD.

• With the same height as Slim ODD
• 10.15cm x 1.27cm (4" x 0.49")
• Direct Connect Vertical type

• U2-ATAPIS50
• With three screws for mounting
• User's Manual

• S2-ATAPIS50: ATAPI to SATA Bridge Board
• SLIM50240: Slim ATAPI to IDE40 Adapter