USB Bridge Board
U2-SATA22
USB 2.0 to SATA Bridge Board

Highlights
- Direct Connect to SATA Drive
- Supports both HDD and ODD
- Support HDD S.M.A.R..T. information (with iSMART utility)
- DC Power Input: Big IDE 4-pin DC Power Connector
Introduction
U2-SATA22 is an USB 2.0 to SATA bridge board. It has an USB 2.0 high-speed device port and a SATA 1.5Gbps/3Gbps host port. The high performance USB interface can connect to any high speed or full speed USB host or USB hub and can instantly be detected as a USB mass storage device. The maximum throughput can goes up to 30MB/sec.
Technical Specifications
USB to SATA Bridge Board
- USB 2.0:
- Compliant with USB 2.0 specifications and passes USB certification.
- Supports USB high speed (480Mbps) and full speed (12Mbps) transfer rates.
- USB Mass Storage Class Bulk-Only Transport Specification Compliant.
- Serial ATA:
- Serial ATA Revision 2.5 Specification Compliant
- Supports Serial-ATA generation 2 transfer rate of 3Gb/s
- 2K bytes data buffer for downstream and upstream optimized data transfer performance
- Vendor/Product related configuration information can be customized thru external I2C compatible Serial EEPROM or SPI serial flash.
- Serial EEPROM contents can be updated through USB interface
- Firmware can be upgraded easily through USB interface.
- Support HDD S.M.A.R..T. information (with iSMART utility)
- Provides pin header for Power and SATA Activity Indicator LEDs
- Self Powered Mode Operation
- DC Power Input:
- Big IDE 4-pin DC Power Connector
Physical Dimensions
- 6.40cm x 3.65cm x 2.83cm
- Direct Connect Vertical type
Hardware Requirements
- Desktop PC: with either a built-in USB (1.0 or 2.0) controller or an USB (1.0 or 2.0) to PCI Host Adapter equipped with an external USB port.
- Laptop PC: with either a built-in USB (1.0 or 2.0) controller or an USB (1.0 or 2.0) to CardBus PC Card equipped with an external USB port.
Operating System Requirements
Operating System Requirements
- No Driver Installation
- Windows ME/2000/XP/2003/Vista/7; MacOS 9.x or above; Linux (kernel 2.4.18 or above)
- Driver Requirements
- Windows 98 (provided by Prolific) ; Mac OS 8.6 (provided by Apple in their website)
Kit includes
- U2-SATA22 Bridge Board
- Overview
Document Download
