IOI Technology Corporation
Your I/O Solution Provider

• Supports USB Super-Speed/High-Speed/Full-Speed
• Provides Backup button
• DC Power Input: Big IDE 4-pin DC Power Connector

U3-SATA201 is USB3.0 to SATA 3Gbps Bridge Board. It has an USB SuperSpeed device port and a SATA 3Gbps host port.
U3-SATA201 translates the communication protocol between SATA 3Gbps and SuperSpeed USB commands.
Supports the USB Mass Storage Class Bulk-Only Transport Specification.
U3-SATA201 provides the perfect solution for data backup and transferring of data between computers using SATA drives.

USB to SATA Bridge Board

• USB3.0:
  • Complies with USB3.0 Specification, USB Mass Storage Class, Bulk-Only Transport Specification
  • Supports USB Super-Speed/High-Speed/Full-Speed Operation
  • Supports USB HID operation
  • Supports USB2.0/USB3.0 power saving mode
  • Supports external SPI NVRAM for Vendor VID/PID of USB2.0/USB3.0 device controller
• Serial ATA:
  • Complies with Gen2i/Gen2m of Serial ATA II Electrical Specification 2.6
  • Supports SATA II Asynchronous Signal Recovery (Hot Plug) feature
  • U3-SATA201-PM supports SATA Port Multiplier.(Note: Support IOI SPM393/393PS/394 only)
• LEDs
  • Provides Power and Disk Access Indicator LEDs
  • Provides USB 2.0 Link/ACT Indicator LED
  • Provides USB3.0 Link/ACT Indicator LE
• Provides backup button
• DC Power Input:
  • Big IDE 4-pin DC Power Connector
• Software
  • Supports FNet PCClone EX Lite Backup software
  • Supports FNet TurboHDD USB software to improve USB performance

U3-SATA201-7	U3-SATA201-PM	U3-SATA201-22
(With Standard Firmware)	(With Firmware supports SATA PM)	(With Standard Firmware)

• U3-SATA201-7: 83.3mm x 21.56mm x 38.6mm
• U3-SATA201-PM: 83.3mm x 21.56mm x 38.6mm
• U3-SATA201-22 : 83.3mm x 21.56mm x 44.1mm
• SCSI 1 50pin Low Density Centronics Connector Form Factor. (Fit to most standard SCSI enclosure)

• Desktop PC: with either a built-in USB (1.0 or 2.0 or 3.0) controller or an USB (1.0 or 2.0 or 3.0) to PCI Host Adapter equipped with an external USB port.
• Laptop PC: with either a built-in USB (1.0 or 2.0 or 3.0) controller or an USB (1.0 or 2.0 or 3.0) to CardBus PC Card equipped with an external USB port.

USB 2.0 :

• Windows2000/XP/Vista/7, MAC 9.2 or later version.
  • No driver installation for Windows2000/XP/Vista/7, MAC 9.2 or later version

USB3.0 :

• Windows2000/XP/Vista/7, MAC 9.2 or later version.
  • Your Host need to support USB3.0 Driver

• U3-SATA201 Bridge Board
• CD-tilte (Backup software & TurboHDD USB software)
• User's Guide

• USB3-EXS-AB USB3.0 A to B Type Cable
• U3-PCIE1XG201 USB3.0 to PCI Express Gen 2 Card
• SPM393 One to Five SATA Port Multiplier RAID Controller
• SPM393PS Two to Four RAID Controller with a port selector function
• SPM394 One to Five SATA Port Multiplier RAID Controller with LCD Module