IOI Technology Corporation
Your I/O Solution Provider

• Supports USB 3.0 data transfer rate up to 5Gbps
• Supports two downstream USB 2.0 ports and two SATA device ports.
• Supports both SATA HDDs and ODDs.
• Supports over 2-Terabytes and Advanced Format (4K Sectors) HDDs
• Supports SATA ODDs (BD/DVD/CD)
• Provides screw holes on bracket for supporting USB3 cable with Jackscrew in B-plug

U3H0S221SH provides two downstream USB 2.0 ports and two SATA device ports.
It is ideally suited for tailgate interface applications for two SATA drives and two USB devices.
It allows SATA drives and USB devices to be connected to USB 3.0 serial bus in a plug-and-play fashion.
U3H0S221SH provides a cost-effective solution for system integrator to integrate two SATA drives and two USB devices into their system through the USB 3.0 serial bus.

U3H0S221SH integrates two key components:
1). USB 3.0 HUB (Two USB 3.0 & Two USB 2.0)
2). Two USB 3.0 to SATA Bridge Controllers

1). USB 3.0 Hub (Two USB 3.0 & Two USB 2.0):

• Compliant to Universal Serial Bus 3.0 Specification Revision 1.0
• Compliant to Universal Serial Bus Specification Revision 2.0
• Supports USB 3.0 SuperSpeed (5Gbps), USB 2.0 Hi-Speed(480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps)
• 4 downstream ports
  • Two downstream USB 2.0 ports. (Right angle USB A receptacle connector)
  • Two downstream USB 3.0 port which integrated two SATA Bridges
• Upstream port
  • USB 3.0 B-Type connector with Screw Holes for thumbscrew locking Type USB 3.0 Cable
• Supports individual mode for power enable and over current detection on each down-stream port
• DC Power Connector
  • Floppy Disk Drive like mini 4-pin DC power connector

2). Two USB 3.0 to SATA Bridge Controllers:

• High Performance USB 3.0 to SATA Storage Bridge Controller
• USB 3.0 Specification and USB 2.0 Specification Compliant
  • USB-IF SuperSpeed Logo Certified (TID No. 340000009)
  • SuperSpeed(5Gbps), Hi-Speed(480Mbps), and Full-Speed(12Mbps)
  • USB Mass Storage Class Bulk-Only Transport
• Serial ATA Revision 3.0 Specification Compliant
  • SATA Gen2i/Gen2m (3Gbps) and SATA Gen1i/Gen1m (1.5 Gbps)
  • Supports SATA Hot Plug
  • Supports SATA Port Multiplier
• Supports over 2-Terabytes and 4KB-sector Hard Drives

Application for SATA drives and USB device

• Support Microsoft Windows 7, Vista, XP, 2003, 2000, and ME
• Support Mac OS X
• Support various Linux kernels

• 89mm (W) x 21.56mm (H) x 61mm (D)
• Form Factor
  • SCSI I 50pin Low Density Centronics Connector Form Factor
  • Fit to most standard SCSI enclosure.

• U3H0S221SH --- USB 3.0 HUB with two USB 3.0 to SATA Bridges Integrated
• CB-00072 --- Y-Shape DC Power Cable (Red, Black, Black, Yellow) with three power connectors
• Two CB-00334--- SATA plug with latch to SATA plug with latch Signal Cable in length of 50cm
• CB-00523-01 - A Plug -to- B Plug USB 3.0 cable with Jackscrew in length of 1.5m
• Overview (User's Guide)