IOIUSB | U3H414E | Four ports USB 3.0 HUB w/USB Battery Charging spec 1.2 (CDP) | USB 3.0 Machine Vision Hub

U3H414E

Four downstream ports USB 3.0 HUB (3.5" FDD Form Factor) w/USB Battery Charging spec 1.2 (CDP)

U3H414E

Highlights

  • USB 3.0 Compliant Hub, TID# 330000037
  • Supports USB 3.0 SuperSpeed (5Gbps), USB 2.0 Hi-Speed (480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps)
  • Supports Spread Spectrum Clock (SSC)
  • Multi Transaction Translator (MTT) Hub: Four Transaction Translators, One Per Port
  • 3.5" FDD Form Factor
  • Provides USB 3.0 cable port lock mechanism
    • One upstream USB 3.0 cable port (Standard B-type Receptacle) lock mechanism
    • Four downstream USB 3.0 cable ports (Standard A-type Receptacle) lock mechanism
  • Supports USB Battery Charging Specification Revision 1.2 for Charging Downstream Ports (CDP).
  • No Special Driver Requirements; Works Seamlessly With Any Operating System With USB Stack Support

Introduction

U3H414E is a high-performance four-port Universal Serial Bus (USB) 3.0 compliant Hub.

U3H414E allows for a maximum data transfer rate of up to 5Gbps, or ten times the throughput available to USB 2.0 based devices. Other enhancements provide for improved interaction between device and host controller, including important advancements in power management.

U3H414E provides simultaneous SuperSpeed USB and High-Speed/Full-Speed connections on the upstream port and provides SuperSpeed (5Gbps) USB, High-Speed (480Mbps), Full-Speed (12Mbps), or Low-Speed (1.5Mbps) connections on the downstream ports. When the upstream port is connected to an electrical environment that only supports High-speed or Full-speed/Low-speed connections, SuperSpeed USB connectivity is disabled on the downstream ports. When the upstream port is connected to an electrical environment that only supports Full-speed/Low-speed connections, SuperSpeed USB and High-speed connectivity are disabled on the downstream ports.

Technical Specifications

  • USB 3.0 Compliant Hub, TID# 330000037
    • Upstream Port Supports SuperSpeed USB, High-Speed and Full-Speed Connections
    • Supports Four Downstream Ports
    • Each of the Four Downstream Ports Support SuperSpeed USB, High-Speed, Full-Speed/Low-Speed Connections
  • USB 2.0 Hub Features
    • Multi Transaction Translator (MTT) Hub: Four Transaction Translators, One Per Port
    • Four Asynchronous Endpoint Buffers Per Transaction Translator (TT) for Better Throughput Than the USB Required Minimum of Two Buffers Per TT
  • Provides Upstream Connection status LEDs (SuperSpeed and High-Speed):
    • High-Speed status LED
      • Off = Hub in low/full speed mode
      • On  = Hub in high-speed mode
    • SuperSpeed status LED
      • Off = Hub not in SuperSpeed USB mode
      • On  = Hub in SuperSpeed USB mode
  • Downstream Port Configuration:
    • Enabled all Downstream Port
    • Marked as Removable
    • Battery Charging Enabled
      • Supports USB Battery Charging Specification Revision 1.2 for Charging Downstream Ports (CDP).
  • U3H414E1 Power
    • DC Power input Connector: Walkman-type 2.0 mm DC Jack
    • Power Input Range: DC 9 ~ 24V ( max. 5.0A)
  • U3H414E2 Power
    • DC Power input Connector: MINI-COMBICON Header
    • Power Input Range: DC 9 ~ 24V ( max. 8.0A)
  • Self-powered operation.
  • Downstream USB Bus Power
    • Each downstream Port (P1 ~ P4) can supply up to 2.1A.
  • Supports Over-current detection and Individual power control.
  • Provides downstream ports Bus-Power indicator LEDs (Green)
  • Customizable vendor ID, product ID, and device ID.
  • USB 3.0 cable ports (Provides USB 3.0 cable port lock mechanism)
    • One upstream port (Standard B-type Receptacle)
    • Four downstream ports (Standard A-type Receptacle)

Available Models

U3H414E1 
Walkman-type 2.0 mm DC Jack
U3H414E2
MINI-COMBICON Headers